More Than Just a Screen: Choosing a Storm Door for Sun, Wind, and Snow

A well-built door is the first line of defense against intense sun, wind, and energy loss.
By an exterior door industry contributor. That inexpensive storm door you bought from a big-box store looked great for about one season. Now, the closer fails to catch, the frame has a slight warp, and a draft slips through the gap on windy days. In a milder climate, this might just be an annoyance. But along the Front Range, the intense sun and dramatic temperature swings can quickly degrade inferior materials.
The problem goes beyond a rattling frame. A poorly sealed door is a constant source of energy loss, and Colorado’s high altitude adds another challenge: increased ultraviolet radiation that breaks down finishes, seals, and plastic parts faster than at sea level.
Quick answer: The best storm door for Colorado’s climate is one with a durable frame, UV-resistant finish, and energy-efficient glass. Your primary decision involves balancing three factors: the ventilation you need, the insulation you want, and the durability required to withstand intense sun and wind. Professional measurement and installation are critical for ensuring a proper seal.
What's inside
Why Don't Standard Doors Last in a High-Altitude Climate?
Comparing Storm Door Materials: Aluminum, Steel, and Composites
How Does Glass Choice Impact Your Energy Bills?
Frequently Asked Questions
The Final Check: Is It Built for the Front Range?
Why Don't Standard Doors Last in a High-Altitude Climate?
Standard doors often fail because their materials and construction cannot handle the combination of intense UV radiation, extreme temperature swings, and high winds common to the Front Range.
The primary culprit is the sun. At a higher elevation, the thinner atmosphere filters out less ultraviolet radiation. This constant, intense exposure degrades materials far more quickly than at sea level.
Next is the dramatic daily temperature fluctuation. It is not uncommon for surfaces in direct sunlight to heat up significantly during the day and then face near-freezing temperatures at night. This cycle of rapid expansion and contraction puts immense stress on a door's structure.
❝ When evaluating a door, ask the installer about the frame's internal structure. A hollow aluminum frame might look sturdy, but it can bow under sustained wind pressure. A reinforced or foam-filled frame provides much better resistance to warping and also adds insulation.
Finally, wind adds a constant physical force. A flimsy door frame will flex under strong gusts, compromising the seal. The hydraulic or pneumatic closer, a critical piece of hardware, is often the first component to fail on a budget door. Once the closer is damaged, the door can slam shut or be hyperextended by wind, leading to bent hinges and a misaligned frame, a common repair for Denver Storm Door Colorado. These environmental factors work together, accelerating wear and leading to premature failure.
Comparing Storm Door Materials: Aluminum, Steel, and Composites
Your choice depends on balancing durability against maintenance, with aluminum offering rust-proof performance, steel providing maximum security, and composites delivering excellent insulation.
Aluminum is the most common material, but not all aluminum doors are created equal. You should look for doors made from extruded aluminum, where the metal is shaped while hot to create a single, thick, and strong piece. This is far superior to roll-form aluminum, which involves bending a thin sheet of metal into shape, making it much more prone to denting from hail or accidental impacts. While aluminum is naturally rust-proof, the finish is critical. A powder-coated or baked-on enamel finish will resist fading and chalking from the intense high-altitude sun far better than a simple painted surface.
For security, steel is the strongest option. A steel security storm door provides a formidable barrier. However, its primary weakness is rust. If the protective coating is scratched or chipped, the steel underneath can corrode, especially with melting snow. Ask any potential installer about the coating process. Is it a multi-layer powder coat? What is the warranty on the finish against rust? Steel doors are also heavier, which puts more stress on the home's door jamb and requires robust, high-quality hinges to prevent sagging over time.
Composite and vinyl-clad wood core doors offer excellent insulation. The wood core prevents heat and cold transfer, while the outer layer provides a weather-resistant, low-maintenance surface.
❝ A simple way to judge frame strength is to ask for the wall thickness or gauge of the main frame components. A heavy-duty aluminum door might have a frame thickness of 1.25 inches or more, while a basic model could be less than an inch. This single measurement tells you a lot about the door's ability to resist wind and impact.
Material | Key Advantage | Main Drawback | Best For... |
Aluminum | Rust-proof and lightweight | Can dent easily if thin | All-around performance and ventilation. |
Steel | Maximum strength and security | Can rust if finish is compromised | Homes where security is the top priority. |
Composite/Clad | Best insulation value | Can become brittle (vinyl) or warp | Maximizing energy efficiency. |
Choosing the right material is the first step. Next, you must consider the glass, hardware, and especially the quality of the installation, which ultimately determines how well the door performs against the elements.
How Does Glass Choice Impact Your Energy Bills?
The right glass can significantly lower your heating and cooling costs by controlling how much solar heat enters your home in the summer and how much furnace heat escapes in the winter.
Most basic storm doors use single-pane tempered glass. While strong and safe, it offers almost no insulation. In a Colorado winter, this cold sheet of glass will radiate cold into your entryway, forcing your furnace to work harder. In the summer, it does little to stop the intense sun from heating up your home. Upgrading the glass is one of the most effective ways to improve a storm door's performance.
The key technology is Low-E, or low-emissivity, glass. This glass has an ultra-thin, transparent metallic coating that reflects infrared and ultraviolet (UV) light while allowing visible light to pass through. Think of it as a filter. In the summer, it reflects the sun's heat away from your door, keeping your home cooler and reducing the load on your air conditioner. In the winter, it does the opposite, reflecting your home's radiant heat from the furnace back into the house instead of letting it escape outside.
❝ Many people think of insulated glass only as a cold-weather feature. In a place known for abundant sunshine, its summer performance is just as important. A Low-E coating works year-round, blocking solar heat gain in July and preventing heat loss in January.
For even better performance, consider a double-pane insulated glass unit (IGU). This sandwiches a layer of air or an inert gas like argon between two panes of glass. This pocket of gas is a poor conductor of heat, creating a thermal break that dramatically slows down energy transfer. An IGU with a Low-E coating is the most energy-efficient option, providing a robust barrier against both summer heat and winter cold. This is especially valuable during Colorado's rapid temperature drops, as it helps maintain a stable indoor temperature.
When discussing options with an installer, ask about the specific type of Low-E coating. There are different formulations designed for different climates. For the Front Range, you want a coating that provides a good balance of blocking solar heat gain while still allowing for some passive warming in the winter.
Frequently Asked Questions
What is the best storm door for the money? The best value comes from durability, not just the initial price. A door with a heavy-gauge extruded aluminum frame, a durable powder-coat finish, and a quality closer mechanism will outlast a cheaper model several times over. For most homes along the Front Range, a well-built aluminum door with interchangeable screen and Low-E glass panels offers the best balance of year-round performance and cost. Always check the warranty on the finish and the hardware, as these are often the first components to fail in the high-altitude sun.
What's the average cost to install a storm door? Installation costs vary based on the door's material, glass package, and the condition of your home's existing door frame. A standard-sized, basic aluminum door will fall into one price category, while a custom-sized steel security door with insulated glass will be significantly more. Be wary of any quote that does not involve a physical inspection. An installer needs to assess your door jamb for squareness and check for any rot or damage that could complicate the work and affect the final price.
How do I order a custom-fit storm door? The process should always start with a professional measurement. Off-the-shelf doors from big-box stores rarely fit older homes perfectly, leading to poor seals and drafts. A specialized installer will measure your opening precisely, discuss your needs for ventilation and light, and help you select the right frame material, glass, and hardware. Once you finalize your choices, the door is typically ordered or built to your specifications before the installation is scheduled.
Do I need a full-view, mid-view, or high-view storm door? This choice balances light, durability, and ventilation. A full-view door has a single, large glass panel that can often be swapped for a full screen, maximizing natural light and airflow. A mid-view door has a solid panel on the bottom half, making it more durable against kicks, pets, or kids, which is a common choice for busy households. High-view doors have the largest solid panel, offering the most privacy and structural rigidity, but they allow the least amount of light.
Can a storm door really improve my home's energy efficiency? Yes, especially when paired with an older, less-insulated primary door. A well-sealed storm door creates an insulating pocket of air, which acts as a buffer against extreme outdoor temperatures. This reduces heat transfer through your main door, easing the load on your HVAC system. It also provides a critical layer of protection for your main door's finish, shielding it from direct sun, snow, and wind, which extends its life and reduces maintenance costs.
The Final Check: Is It Built for the Front Range?
A storm door in Colorado is more than a simple purchase. It is an investment in equipment that must withstand intense UV radiation, high winds, and dramatic temperature shifts. The initial price tag often hides the true cost of ownership. A flimsy, poorly installed door quickly becomes a source of drafts and repeated repair costs.
The critical question is not which door looks best, but which system is engineered for this environment. This means looking past the surface to the details that matter. Focus on the gauge of the aluminum, the quality of the finish, the type of Low-E glass, and the durability of the closer. These components determine if the door will seal properly for years or fail after a few seasons.
Ultimately, a door's performance depends on its installation. A premium door in an out-of-square frame will never provide an adequate seal. Your final decision should weigh the product's material quality and the installer's expertise equally. A door measured and fitted correctly is the only one that will deliver on its promise of security, efficiency, and durability.
About the author
Denver Storm Door is a Colorado-based company specializing in the installation of storm, security, and French doors for homes across the Denver metro area and the Front Range. They focus on providing durable, custom-fit solutions engineered to withstand the region's unique climate challenges, from high-altitude UV exposure to heavy winds and snow. With an emphasis on technical craftsmanship, their team works exclusively on secondary exterior doors, ensuring a precise fit and long-term performance for every project.


