top of page

Elevated Magazines - Premium Lifestyle Content

From the superyachts making waves at Monaco to the estates redefining luxury living in Palm Beach, the automotive debuts turning heads in Geneva, and the artists commanding record prices at auction — Elevated Magazines captures the luxury lifestyle stories, brands, and cultural moments that have the world's most discerning audiences talking right now.

Pre-Handover Inspection in Dubai: A Buyer's 10-Point Checklist

Oct 31
4 min read

Collecting the keys to a new apartment or villa is exciting, and it is also the moment to be most careful. Depending on your contract, getting a developer to put problems right can become harder once you have formally accepted the unit, so a pre-handover inspection before you sign off is worth planning early. This guide gives a practical 10-point checklist you can use yourself, explains how it fits with a professional survey, and lists what to ask an inspector before you book. The checks draw on how Baseera 360 carries out handover inspections for new units in Dubai, where an engineering-led team inspects units and reports carry engineer sign-off.

What a pre-handover inspection covers

A pre-handover inspection is a detailed check of a completed unit, carried out before you accept it from the developer, to find defects and unfinished work. These items are usually called snags. In the UAE the process normally runs alongside the developer's own handover procedure, so read your sales and purchase agreement and the handover notice for timings, notice periods and any defects liability terms. For general guidance on property transactions, the Dubai Land Department is a sensible starting point. Rules and developer procedures can change, so check current requirements with the relevant authority.

New-build units in the UAE are often handed over in large batches, finishing quality can vary from floor to floor, and the climate puts pressure on air conditioning, plumbing and waterproofing from day one. Before you go in, bring a torch, a phone for photos, a tape measure, a basic socket tester, your floor plan and the specification from your agreement. Allow several hours for a typical apartment, and go in daylight.

The 10-point checklist

  1. Specification and layout. Compare finishes, fixtures, fittings, room sizes and layout against your agreement and brochure. Note anything missing or substituted.

  2. Walls, ceilings and paint. Hold the torch at a low angle along each surface to reveal cracks, patching, uneven plaster, drips and stains. Water marks on a ceiling deserve a closer look.

  3. Floors and tiles. Tap tiles for hollow sounds, check for cracks, uneven joints, poor grout and sloping floors, and look under rugs or protective sheeting.

  4. Doors, windows and locks. Open, close and lock everything. Check alignment, seals, handles, glass scratches and gaps that let in dust or noise.

  5. Plumbing and drainage. Run every tap and shower, flush toilets, check hot water and pressure, look for leaks under sinks and confirm drains clear quickly.

  6. Electrics. Test every socket and switch, light fittings, the distribution board labelling, doorbell and intercom. Report anything warm, loose or sparking immediately.

  7. Air conditioning. Run each unit, check that it cools, listen for noise, look for water leaks at the unit and confirm thermostats and vent covers work.

  8. Kitchen and wardrobes. Open doors and drawers, check hinges, worktop joints, sealant and any included appliances.

  9. Balcony, terrace and waterproofing. Check that floors slope toward drains, look for cracks and failed sealant, test railings and watch for damp patches. A moisture meter or thermal camera can reveal hidden damp that the eye misses.

  10. Safety and services. Confirm smoke detectors and alarms, fire exits and signage in shared areas, meter readiness and utility connections.

This is how most owners approach apartment snagging, and it catches many visible issues. What it rarely catches are hidden ones: moisture behind finishes, concealed electrical faults or waterproofing failures. That is where a professional inspector adds value.

After the walkthrough, and choosing an inspector

Record every defect in writing, room by room, with a photograph and a clear description. Send the list to the developer by email or through the official handover channel rather than relying on verbal promises, ask for fix dates, and request a re-inspection before you accept the unit. Keep copies of everything.

If you decide to bring in a professional for new home snagging, ask:

  • What are the inspector's qualifications, and does an engineer sign off the report?

  • What equipment will be used, such as moisture meters or a thermal camera?

  • How long will they spend on a unit of your size?

  • What does the report look like, and does it include photos and locations?

  • Do they re-inspect after the developer completes repairs?

  • Are they independent of the developer?

A good snagging inspection in the UAE should leave you with a report any developer can act on, not just a list of complaints. You can request a snagging inspection for your unit from the Baseera team, scoped to your unit type and handover timeline.

Treat the handover as a decision point rather than a formality. With a clear checklist, written records and the right inspector, you can accept your new home knowing what has been fixed and what has not.

FAQ’s

When should a pre-handover inspection be done?

After the developer tells you the unit is ready but before you formally accept it. Check your sales and purchase agreement for notice periods and timelines, and book the inspection early so there is time for repairs.

How long does apartment snagging take?

It depends on the unit size and finish level. Allow several hours for a typical apartment, and longer for a villa or a unit with many defects.

Can I do a new home snagging myself?

You can find many visible issues with a checklist like the one above. Hidden problems such as moisture behind finishes or concealed electrical faults usually need equipment and experience, so many buyers add a professional inspection.

What if the developer does not fix the snags?

Keep a written record of every defect and every request, follow the process set out in your agreement, and escalate in writing. If the issue continues, seek advice from the relevant authority, such as the Dubai Land Department, or a legal professional.

Perrelet Casino Royale
Northrop & Johnson Yachts for Charter
Nuvolari Lenard
bottom of page