Robotic Orthopaedic Surgery in Singapore: What It Is and Who It Suits

No, the robot doesn't operate on its own
When people hear "robotic surgery", many picture a machine operating by itself while the surgeon watches. In orthopaedics, that isn't how it works. Robotic systems are precision tools that help an orthopaedic surgeon plan and carry out an operation, most often a knee or hip replacement, with the surgeon in control throughout.
What is robotic orthopaedic surgery, and who does it suit? It's surgery in which a computer-guided robotic system, usually combined with a 3D plan built from your scans, helps the surgeon position implants and prepare bone very precisely. It's most widely used for partial and total knee replacement and for hip replacement. It tends to suit people with arthritis who need a joint replacement, particularly where precise implant positioning or preserving healthy tissue is a priority. It isn't needed for every patient, and it doesn't replace the surgeon's judgement.
This guide explains what the robot does and doesn't do, walks through a robotic joint replacement step by step, summarises what the research shows, and helps you think about whether it's relevant to you.
Who does what in the operating theatre
The robotic system | The surgeon | |
Before surgery | Builds a 3D model of your joint from a CT scan, for systems that use one | Plans the size, angle and position of the implants on that model, and decides the overall approach |
At the start of the operation | Maps the real joint and matches it to the plan using tracking markers | Makes the incision, exposes the joint and assesses the soft tissues |
During bone preparation | Guides or limits the cutting tool so it stays within the planned boundaries | Holds and controls the instrument, and can adjust the plan at any point |
Balancing the joint | Shows real-time measurements of alignment and ligament tension | Fine-tunes implant position and soft-tissue balance based on those readings and their judgement |
Closing | No role | Inserts the final implants and closes the wound |
Different systems work in different ways. Some are robotic arms that the surgeon guides, which resist movement outside the planned cutting area. Others are handheld tools that switch off or retract when they reach a planned boundary. Some build the plan from a CT scan before surgery; others map the joint during the operation without one. What they share is the aim of turning a carefully measured plan into precise bone cuts and implant positions.
A robotic joint replacement, step by step
The exact process depends on the system and the joint, but a robotic-assisted knee or hip replacement typically follows these steps:
Consultation and decision. Your orthopaedic surgeon examines you, reviews your X-rays and discusses whether a joint replacement is right for you, and whether robotic assistance suits your case.
Pre-operative scan, if needed. Some systems use a CT scan of the joint taken a few weeks before surgery. Software turns it into a 3D model of your bone.
Virtual planning. Using the model, the surgeon plans the implant size and exact position before you arrive in the theatre, taking into account your anatomy and alignment.
Registration in theatre. Once the joint is exposed, small tracking markers allow the system to match your actual bone to the plan, point by point.
Testing the joint's movement. The surgeon moves your knee or hip through its range, and the system shows how the planned implants would affect alignment and soft-tissue tension. The plan can be adjusted on the spot.
Guided bone preparation. The surgeon removes bone with a tool that the robotic system guides or limits to the planned area, helping to protect surrounding ligaments and tissue.
Implants and closure. The surgeon places the final implants, checks movement and stability again, and closes the wound.
Recovery and rehabilitation. Recovery follows the same principles as conventional joint replacement: early walking with support, physiotherapy and a gradual return to everyday activities.
From the patient's point of view, the main visible differences are the possible pre-operative scan and, in some cases, a slightly longer operation while the system is set up.
What the research shows
Robotic assistance in orthopaedics is still developing, and it helps to be clear about what the evidence does and doesn't show so far.
Precision is the clearest benefit. A 2024 systematic review and meta-analysis of nine randomised controlled trials in total knee replacement found that robotic assistance produced better mechanical alignment and fewer alignment outliers than conventional surgery. In other words, implants were more consistently placed where the surgeon planned.
Patient outcomes are encouraging but mixed. The same review found better scores on a standard questionnaire of knee pain, stiffness and function with robotic assistance, while conventional surgery showed better long-term knee bending. Operations took longer with the robot.
Long-term value is still being studied. The authors noted that the long-term benefits and cost-effectiveness of robotic knee replacement remain uncertain. Implant survival over 15 to 20 years, the main measure of a joint replacement's success, will take time to compare properly.
What this means in practice: robotic assistance is a tool that can help a surgeon achieve a precise plan. It doesn't guarantee a better result for every patient, and a well-performed conventional joint replacement remains an excellent operation. The surgeon's experience, the right choice of implant and your commitment to rehabilitation still matter most.
Who it suits, and who may not need it
Robotic assistance isn't a separate treatment you choose instead of a joint replacement. It's a way of performing one. So the first question is always whether you need surgery at all. For many people with arthritis, exercise, weight management, injections and other non-surgical treatments come first.
People who may be well suited
Those needing a partial knee replacement, where only one part of the knee is worn. Precise placement and preserving the healthy parts of the joint are central to this operation.
People with knee or hip arthritis who need a total joint replacement and whose surgeon wants detailed pre-operative planning.
Patients with unusual anatomy, such as a deformity, previous fracture or significant bowing of the leg, where a 3D plan can help the surgeon map the joint.
Younger or more active patients, who place more demand on their implants over a longer life, and for whom accurate alignment is a priority.
When it may add less
When surgery isn't yet needed. Early arthritis is usually best managed without an operation.
When a conventional approach suits the case well, such as a straightforward joint replacement in an experienced surgeon's hands.
When the robotic system isn't designed for the procedure. Robotic assistance is mainly used for knee and hip replacement, and isn't routine for most keyhole or fracture surgery.
Questions to ask your surgeon
Is a joint replacement the right next step for me, or should I try other treatments first?
Would you use robotic assistance in my case, and why?
Will I need a CT scan beforehand?
How does the cost compare, and what will my insurance cover?
The Bottom Line
Robotic orthopaedic surgery isn't a different operation, and it isn't a machine working on its own. It's a precision tool that helps a surgeon turn a detailed plan into accurate bone cuts and implant positions, most often in knee and hip replacement.
The evidence so far points clearly to better precision, while longer-term advantages are still being studied. For most people, the more important questions come first: whether a joint replacement is needed at all, which type suits the joint, and who will guide the recovery afterwards.
In Singapore, robotic-assisted joint surgery is one of the options offered at International Orthopaedic Clinic (IOC), where Dr Alan Cheung, Senior Consultant Orthopaedic Surgeon, focuses on adult joint reconstruction and robotic surgery. He has trained on the MAKOplasty, NAVIO and Robodoc systems and completed a fellowship in joint reconstruction at Royal Prince Alfred Hospital in Sydney (Mount Elizabeth Hospitals).
This article is for general information and does not replace a medical assessment.


